MARCO POLO GROUP slurry tankers GMP1B belong to a wide range of agricultural trailers of R3a category, with a maximum design speed of 40 km / h for which an approval certificate No. PL * 4759 * 00 has been issued in accordance with Directive 2003/37 / EEC of the European Parliament and of the Council.
GMP1A type vehicle meets the requirements of the Road Traffic Law, the Machinery Directive 2006/42 / EC and all relevant health and safety Norms:
A distinguishing feature of GMP1B tankers is a self-supporting structure in which the tank and other components are inseparably connected and mounted on a single axle wheel. The entire steel structure is hot-dip galvanized which guarantees longevity of the tanker. The advantage of single-axle suspension is the agility and ease of maneuveringv of the tanker.
The table lists the basic specifications of the standard equipped tanker.
|TANK CAPACITY [l]||6000|
|TANK DIAMETER [mm]||1600|
|TANK LENGTH [mm]||3500|
|NUMBER OF BAFFLE PLATES||1|
|TRAILER MAXIMUM LENGTH [mm]||5750|
|TRAILER MAXIMUM WIDTH [mm]||2450|
|TRAILER MAXIMUM HEIGHT [mm]||2850|
|TRACK OF WHEELS||1800 lub 1900*)|
|UNLADEN WEIGHT [kg]||2250|
|TECHNICALLY PERMISSIBLE GROSS WEIGHT [kg]||8150|
|MAXIMUM PERMISSIBLE MASS PER AXLE [kg]||7400|
|MAXIMUM PERMISSIBLE VERTICAL LOAD ON THE HOOK [kg]||2000|
|MECHANICAL OPERATION BRAKE, DRUMS DIMENSIONS [mm]||400×80|
|PARKING BRAKE||mechanical, controlled manually|
|TIRE DIMENSIONS (rim size)||500/60-22.5 (16.00×22.5, number of holes 10)|
|SUSPENSION||single axle without suspension|
|MANDATORY LIGHTENING, LIGHTS||position lights, direction indicators, reflectors, brakes, emergency, outline|
|COUPLING TYPE||drawbar eye D50 lower tractor hitch|
|METHOD TO ADJUST THE POSITION OF THE DRAWBAR EYE||mechanical with drawbar support in the range of 280 mm to 600 mm|
|MINIMAL DEMAND FOR POWER IN THE TRACTOR||65|
|PTO SPEED [rpm]||540|
|VACUUM PUMP TYPE – EFFICIENCY [l/min.]||MEC5000 – 6150|
|REAR LID||closed with the hatch Ø 600 mm|
|MOUNTING BRACKET AND LATCHES – SIZE||5” (Ø127 mm)|
|NUMBER OF MOUNTING BRACKETS||one outlet on the rear lid and two side suction (one blind)|
|CONNECTION SYSTEM||Type „Perrot”|
|FILL LEVEL SPECULUM||two 4″ glass speculum on the front lid|
|TOP HATCH||Ø210 mm|
* 1900 mm spacing for rim with ET-50ETmm offset
On special request (at extra cost) the tanker can be equipped with additional elements:
The size of mounting bracket, latch and mounting bracket of suction hoses can be increased to the size 6 “(Ø152 mm) and use a vacuum pump with increased efficiency. You can increase the tire size to 550/60-22.5.
MARCO POLO GROUP slurry tankers are in the group of the machines in which the energy needed to fill the tank and to empty it is provided by a vacuum pump. It generates a vacuum (vacuum during filling or overpressure during emptying). It is possible to empty the tank gravitationally. Each slurry tanker is equipped with a cylindrical tank made of 5 mm thick steel welded on both sides.
The tank is hot-dip galvanized. It has inner rings reinforcing rings of T-bar and additional stiffeners under the supports supporting the tank.
MARCO-POLO slurry tankers Type GMP1A and GMP1B
are certified and the tankers produced after March 31, 2017
and registered have a 24 month manufacturer’s warranty.
Powrót do kategorii: